THE HEAT PUMP
THAT HEATS,
COOLS AND
CLIMATE CONTROLS

Book demo

How does a heatpump work?

Eltrode’s heat pumps are digitally controlled and emission-free air-to-air heat pumps. The most efficient heat source for heating and drying buildings.

Warm, clean and dry air from the heat pump is sent into the lower part of the building (“green hose”). Air circulates and is drawn back as return air via the “blue hose”. Continuous circulation removes moist air and replaces it with warm, dry air 24/7 at 10,500 m³ per hour per heat pump. Recovering already heated air provides extremely effective heating and drying. The heat pump
is placed outside the building, meaning no indoor noise – a strong HSE benefit.

Easy installation
Good indoor climate
Exceptional construction drying
No indoor noise
Download product sheet
Illustrasjon som viser hvordan en Eltrode varmepumpe funker og sirkulerer luft

Why do I save electricity using a heat pump?

With an Eltrode heat pump you get significantly more heat than you pay for. Our heat pumps produce far more energy than they consume – that's money saved from day one.

Adjust the values ​​below and see what your project can save.

Savings Calculator

Adjust the values to see what Eltrode heat pumps can save your construction site.

Number of heat pumps 1 units
Power saved (kW/hour) 84 kW
Electricity price (€/kWh) € 0.18
Operating hours/day 24 h/day
Project length (days) 180 days

Savings per hour

—

€/hour

Savings per day

—

€/day

Total project savings

—

€ total

CO2 savings vs. alternatives over the project period

Alternative Emissions (g/kWh) Savings (kg)

Cost savings

Up to 68% lower energy costs vs. alternative construction heating
Market-leading efficiency — converts 11 kW into up to 50.2 kW
Low load on construction power supply (22A during operation)
Investment pays for itself rapidly
Significant reduction in overall project operating costs

Emission-free

100% emission-free with the lowest energy consumption
Meets all requirements for fossil-free construction heating
Reduces CO₂ emissions by up to 82% vs. diesel or gas
No fossil fuels — fully electrically driven
Supports BREEAM certification and green project goals

All-in-one unit

Heating, cooling and drying in a single mobile unit
Operates reliably down to -30°C
Installation in approximately 2 hours — plug-and-play
No indoor noise — strong HSE benefit
Suitable for construction sites and permanent installations

Smart control

Real-time dashboard via app, PC or tablet
Live monitoring of temperature, humidity, COP and power
Fault alerts and remote control 24/7
Download reports for energy and BREEAM documentation
Individual project login with overview of all units

Our heat pumps

CHP100: Maximum heating power for the most demanding construction sites

CHP100

CHP50.2: Groundbreaking heating and drying solution for the construction industry.

CHP50.2

FAQ

How does an Eltrode heat pump work?
Warm, clean and dry air is sent into the lower part of the building via the green hose. Air circulates and returns via the blue hose, continuously removing moisture and replacing it with warm, dry air — 24/7 at 10,500 m³ per hour. The unit is placed outside, meaning zero indoor noise.
How much can I save on electricity?
At €0.18/kWh, a single unit can save over €100 per day compared to standard electric heating. The heat pump uses 1 kWh of electricity but delivers 3–4 kWh of equivalent heat — meaning 3–4 times less electricity consumption than conventional heating.
What temperatures can the heat pump operate in?
Eltrode heat pumps are built for Nordic conditions and operate reliably from -30°C to +40°C, making them suitable for year-round use on demanding construction sites.
Can it heat, cool and dry — all in one unit?
Yes. The CHP 50.2 delivers up to 50.2 kW of heating, 38 kW of cooling capacity and effective construction drying — all from a single mobile unit. Switch between heating and cooling mode as needed.
How long does installation take?
Approximately 2 hours. The units are delivered with flexible hoses, quick connectors and zipper connections, making setup fast and straightforward with no specialist tools required.
Can I monitor and control the unit remotely?
Yes. Every unit comes with a digital dashboard accessible via PC, phone or tablet. You get real-time monitoring of temperature, humidity, COP and power consumption, plus fault alerts and 24/7 remote temperature control via 4G.
Is it suitable as a permanent heat source?
Absolutely. Eltrode heat pumps are ideal for commercial buildings, warehouses, sports halls, workshops and shipyards — not just temporary construction use. 100% emission-free, self-cleaning, and with minimal maintenance requirements.
Who is Eltrode?
Eltrode is a Norwegian-owned company established in 2016, with the most extensive documented experience with portable heat pumps in Scandinavia. Specialising in air-to-air heat pumps adapted to Nordic conditions, with an in-house service company ensuring professional follow-up and maintenance.
Company logo

POWER FROM THE NORTH

Eltrode AS
Lyseveien 15
3531 Krokkleiva
Norway
‍
Tlf: +4799096150
‍
ordre@eltrode.no

LinkedIn logoInstagram logoYouTube logoFacebook logo
Product
Heat pumps
Company
About us
Case studies
Contact us
Norwegian site
Swedish site
Other
Privacy policy